Wall lights

We are pleased to add this collection of wall lights, as of March 2016. They are available in a choice of five finishes; most can be supplies for use with candle type bulbs or fitted with a shade.

All lights are made to order and from proper materials. The back plates are typically 8-10mm thich and ferns/leaves from 3-5mm thick.

They have been designed to be easily fitted to any type of wall, solid or dry lined. Please see additional notes below.

The measurements do not include bulb height.

We also make chandeliers and candle sconces; please click Lighting and Candelabra

Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge

Fern Wall Light

A small wall light with great character; ideal for a homely country cottage look. Can be fitted with "candle" tube and bulb (as shown), or with shade and bulb.

Size 9" wide, 8¼" high. Measurements are to top of bulb holder; bulb will typically add about 3".

Can be supplied in Black, Graphite, Polished, Bronze sprayed or Bronze hand acrylic. Click here for examples and descriptions of finishes.

FOR IMPORTANT FITTING INFORMATION PLEASE SEE BELOW

Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge

Baroque Double with Shield

A "character" wall light that likes to be noticed! Particularly at home in a Country House or a Castle? Not suitable for use with a shade, due to spacing of bulbs.

A complementary single light is also available.

Size 12" wide, 12¼" high. Measurements are to top of bulb holder; bulb will typically add about 3".

Can be supplied in Black, Graphite, Polished, Bronze sprayed or Bronze hand acrylic. Click here for examples and descriptions of finishes.

FOR IMPORTANT FITTING INFORMATION PLEASE SEE BELOW

Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge

Baroque Single Rectangle

The same detailed baroque leaf as above, but with a rectangular back plate. Can be fitted with "candle" tube and bulb, or with shade and bulb.

Size 5" wide, 9½" high. Measurements are to top of bulb holder; bulb will typically add about 3".

Can be supplied in Black, Graphite, Polished, Bronze sprayed or Bronze hand acrylic. Click here for examples and descriptions of finishes.

FOR IMPORTANT FITTING INFORMATION PLEASE SEE BELOW

Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge

Baroque Single Square

The same detailed baroque leaf as above, but with a square back plate. Can be fitted with "candle" tube and bulb, or with shade and bulb.

Size 5" wide, 9½" high. Measurements are to top of bulb holder; bulb will typically add about 3".

Can be supplied in Black, Graphite, Polished, Bronze sprayed or Bronze hand acrylic. Click here for examples and descriptions of finishes.

FOR IMPORTANT FITTING INFORMATION PLEASE SEE BELOW


FITTING INFORMATION FOR THE ABOVE ITEMS

All the lights shown above are fitted with standard B15 bayonet bulb holders, but we can fit B15 Edison (screw fitting) if preferred. They will accept all current bulbs and newer low energy bulbs as far as we have been able to try.

Importantly, the fixing screws are all to the sides of the mount plates. Hidden supply cables should always be run vertically or horizontally, so this alleviates any problems regardless of the type of wall. Many wall lights have fixing holes drilled centrally, which can cause many problems when fitting.

All the lights incorporate a "connection area" behind the mounting plate where the light's wiring can be connected to the supply cables, so it is not necessary to chisel out a void in the plaster to accommodate the connection.

All wiring, bulb holders and cable restraints are supplied, but will need to be wired up on arrival. This is a simple job that takes a few minutes. We would be happy to do so ourselves, but are not qualified to do this commercially.

If in any doubt about wiring the bulb holder or connecting to the main circuit, please seek professional advice.